ABUS Pfaffenhain 83WP/63 Weatherproof Hardened Steel Padlock with 63mm Long Shackle

83WP/63: Weatherproof through hardened steel body padlock: ABUS Protection Level: 9

Fully restricted ABUS Pfaffenhain key section, only available from the Lockshop-warehouse so you can control who has keys: Fully Restricted until 2020. This is the highest security key section we offer. Each padlock has anti-drill, anti-pick, and anti bump feature

The ABUS 83WP/63 is the largest most secure padlock in the ‘Extreme’ range. These have the same rugged high impact plastic cover at the smaller 83/53 padlocks but the body is made from solid steel for maximum strength.
The padlock is fitted with the NanoProtect shackle which is as hard as hardened steel but does not corrode/rust excellent protection against physical attacks and the elements.
Plastic covering protects the body of the padlock against water and dirt and it also has a protective key cap to prevent dirt/mud getting into the keyway.
The 83WP/63 is available keyed alike or masterkeyed to any other padlock in the ABUS 83 series.

A great high security padlock for all purposes.

Features:

CEN Grade 4
Solid Steel body with NanoProtect shackle for ultimate corrosion protection.
Rugged high impact sealed lock body for outdoor weather protection with shackle seals and cylinder cover to protect the keyway and keep dirt out.
Drill Resistant
Ball bearing locking (greater protection against pulling and twisting)
Saw resistant

Each padlock cylinder is provided with salt water protection pins to protect against weathering and harsh conditions.


Available Keyed to Differ, Keyed Alike & Masterkeyed

Please note, if ordering keyed alike these padlocks are made by hand to each individual order. This means that you will only receive 2 keys in total with the order and the lead time will be about 2-4 days. Please check with our sales team if you need them faster.

Designed to operate all the cylinders within the ABUS Pfaffenhain range. If you are not purchasing this key with a new lock then we require your specific key code to confirm authorisation before it can be cut. Please enter your key code in the box below and we shall contact you before duplication to confirm your order. Keys in this section are cut and tested to the cylinders you have purchased in your order. We do not supply uncut blanks unless requested.

Additional master key for ABUS Pfaffenhain range of cylinders. When purchased alongside a master keyed cylinder this key will be made up to the same profile allowing it to also operate all locks within that series. If you are not purchasing this key with a new lock then we require your specific key code to confirm authorisation before it can be cut. Please enter your key code in the box below and we shall contact you before duplication to confirm your order.